AIRTIME Wireless Wall Clock System Products from Lathem Time

ATX Transceiver    Designed for small offices, stores or work areas - The ATX mini-transceiver is a cost effective solution for smaller environments. Simply hang the ATX on a wall and it will synchronize all AirTime clocks within its range to the second.

Because our wireless transceivers are designed to function as both a Master signal or a Repeater, multiple ATX units can be used to increase the coverage area for unlimited expansion and flexibility.                                       

  • Synchronizes to atomic clock via WWVB radio (1 Milliwatt) and transmits time to wall clocks and other AirTime family products via UHF radio signal
  • Battery operated.    Battery life is 5 years (optional, maintenance-free AC adaptor is available)
  • Standard power 1mW radio transmission covers 150 foot radius.  Additional units will extend coverage.
  • Wireless transceiver is user installable and separate FCC licensing per installation is NOT required.   
  • One year warranty                                                                 CASH PRICE   $176 

        AC Power Adaptor (optional): 115 VAC input / 6VDC output   CASH PRICE  $24    


 

 

ATX6 Transceiver   Designed for larger areas, like school buildings, airports and hospitals, the powerful 6 watt radio transmitter covers 500 square foot radius  That is over 700,000 square feet of signal coverage indoors (depending on building structure) and one mile outdoors (depending on terrain.)   Expand the coverage area using additional AirTime transceivers (ATX or ATX6). 

The ATX6 not only gives you the power, but the power of choice. Use WWVB radio signal (atomic clock), LAN/Ethernet, GPS or its own internal time source or from your building's existing wired clock system. The ATX6 then transmits wireless signals to all clocks in it's radius. No wires. No worries. No limitations!

  • Separate FCC licensing of user installation is not required
  • Transmits AirTime radio signals every minute
  • Provisions to transmit AT and RC signals on alternating minutes for mixed RC and AT clock systems
  • Internal real time clock provides accuracy of +/-2 minutes per year and automatic Daylight Saving Time corrections
  • Time zone selection feature correctly offsets hour when synchronizing to  atomic clock
  • Provisions to correct with LAN via Ethernet or other AT transceivers via radio signals
  • Internal dry contact allows time synchronization (send or receive) with external systems (ex. intercom, wired master controls)
  • RS485 input or output port allows synchronization with other Lathem signal devices or wired clock systems.
  • One year warranty                        We are not currently authorized to sell this Item, but we can recommend a source that is authorized to sell & install the ATX6.      However, you can still purchase your clocks from us at great savings !!!!  See below......
  •  See Accessories

Analog Wireless Wall Clocks

AirTime Analog Wall Clocks have raised the bar. Accuracy, operation, quality and aesthetics all in harmony. The continuous motion, smooth sweeping second hand means precision and the highest standard of time-keeping. 

  • Wireless time synchronization
  • Automatic Daylight Savings Time adjustment
  • Verification of signal reception (LED indicator on face of clock)
  • Internal UHF radio receiver for reliable signal reception
  • "Plug & Play" installation - no manual setting required
  • Continuous motion smooth sweeping second hand
  • Sturdy metal case or impact resistant plastic case
  • High quality glass crystal
  • Five (5) year life battery provides accurate time during power loss
  • FCC Part 15 Compliant
  • One year warranty
Options:
  • 12" or 15" sizes
  • Plastic or Metal outer rings
  • Single or Double-sided Face
  • Wall or ceiling mount
PRINTABLE SPECIFICATIONS                         

AirTime Analog Wall Clock Specifications.pdf                       Right-click to save (523KB)

AC Powered Analog Wall Clock Specifications.pdf                       Right-click to save (184KB  

 
AT12RP   12" Round, Plastic Case    CASH PRICE   $123    
AT12RP-T 12" Round, Plastic Case with Metal Tim Ring    CASH PRICE   $129    
AT12RM  12" Round, Metal Case    CASH PRICE   $129    
AT15RM 15" Round, Metal Case    CASH PRICE   $164    
  AT12RD  12" Round, Double Face, Metal Case    CASH PRICE   $389    
AT15RD  15" Round, Double Face, Metal Case    CASH PRICE   $162    
 

Solar Powered Wall Clocks

Solar Powered Wall Clocks  Go wireless and Green!   Solar panels located on the front dial of the clock convert your room's interior lighting into power without any need for AC power.  An innovative sensor detects if your room has the minimal lighting required and indicates with an LED Green light. A smooth, sweeping second hand means you're not only watching recycled energy in motion, but you've got the finest quality on the market.

Solar_logo_240  

 

            One year warranty

  • Internal light meter with LED indicates lighting level in room at installed location
  • Wireless time synchronization
  • Backup battery for low light conditions
  • Internal UHF radio receiver for reliable signal reception
  • Automatic Daylight Saving Time adjustment
  • "Plug & Play" installation - no manual setting required
  • Smooth sweeping second hand - continuous motion
  • Sturdy impact resistant plastic case and high quality glass crystal
  • Dial diameter: 12.12"
  • Case diameter: 13"
  • Projection from wall: 2.10"
  • Color: Black outer ring and Gray solar panel masking
  • Weight: 3.98 lbs.
  • Supplemental battery: Lithium CR123A (included)
  •  

     Solar Powered Analog Clock Specifications.pdf | Right-click to save (555KB)                         

     

    AT12RPS  12" Round, Solar Powered, Plastic Case CASH PRICE  $162   

           AC Power Adapter (specify 1ft quick connect or 8ft two prong power cord)  CASH PRICE    $19   


    Digital Wireless Wall Clocks   These bright LED-digital clocks are Ideal for long corridors or open work spaces as they are easy to read over 100 feet away.

    Clocks consist of four-digit LEDs, format (HH:MM) with hours (1-12 or 00-23) and minutes (00-59) with separating colons. Clocks are also available in six-digit format (HH:MM:SS). LEDs illuminate behind an attractive red Plexiglas contained in an all metal housing.

     

    Digital Wireless Wall Clock Specifications.pdf | Right-click to save (152KB)       

    ATDDC4  4", HH:MM, Red, LED, Metal Case  CASH PRICE  $225     

                    ATDDC6  6",  HH:MM, Red, LED, Metal Case  CASH PRICE  $236            


    NOTICE:  Prices on this page do not include shipping, installation or labor under warranty.

     

     Lathem Products Index        Wall Clocks Index      Back to Lathem Wall Clocks   See Lathem Warranties     Home