.

Lathem Wired Digital Display Wall Clocks

The digital display clocks can be used as a stand-alone system or as a secondary to virtually any master controlled system. This flexibility allows you to install additional clocks or replace worn clocks in an existing analog system. An optional RS485 port allows automatic correction from Lathem or other electronic  time recorders. The four-digit display is highly visible from 100 feet. The selectable time display is 12 hours and minutes  with PM indicator, or 24 hours and minutes.

The unit can be mounted directly to the wall or to a single gang outlet box. With other kits, it can also be

dual wall or dual ceiling mounted. A vented hole plug is provided for 1/2-inch conduit.

During power failures a 9-volt alkaline battery provides continuous timekeeping. When power resumes,

the display illuminates the correct time.

Item #	Description	cash price
DDC2-RS	Digital Wall Clock w/2" Secondary to analog system & RS485 input	$170
DDC2-RS-24	Same as Above with 24 volt	$197
DDC4-RS	Digital Wall Clock w/4" Secondary to analog system & RS485 input	$229
DDC4-RS-24	Same as above with 24 volt	$250
DDC-TC	Timer Control for DDC2/4, Count up/Count Down	$114
SAM0625	DDC4 Double Mount Wall Kit	$117
SAM0626	DDC4 or DDC2 Double Mount Ceiling Kit	$106
SAM0630	DDC2 Double Mount Wall Kit	$117

NOTICE:  These prices do not include shipping, installation or labor under warranty.

• Digital Display Wall Clocks Brochure.pdf  | Right-click to save (539KB)
• DDC2/DDC4 Installation & User's Guide.pdf  | Right-click to save (599KB)

Please note: When a DD wall clock is set for any secondary type other than stand-alone, the display will show a 12-hour format and the PM indicator will not illuminate. Please consult the User's Guide provided above.

Back to Lathem Index                       See Lathem Warranties                              Wall Clocks Index